PRIMER STRONG WITH QUARTZ SAND

Your Price: €25.93 (€21.08 exc VAT)
Part Number:63

LIQUID DISPERSION OF PLASTICS FOR IMPROVING MINERAL MORTAR AND CREATING CONTACT BRIDGES

 

KEY FEATURES:

- Improves adhesion

- For old ceramic tiles

- For old paint

- Quick setting

- No solvents

 

APPLICATION:

The product is intended for priming difficult and non-absorbent surfaces before applying adhesives

for ceramic tiles, waterproofing, plaster, self-levelling and smoothing compound, etc., on vertical

and horizontal surfaces. WIM primer with quartz sand improves the adhesion to the coated surface,

strongly adhering to it, forming, thanks to its compact shell and rough structure, an appropriate

surface for all kinds of mineral materials applied. After drying, the preparation provides a barrier

between the base and the newly applied layer by limiting their interaction. It prevents too-quick

pulling of water from mortar to the base as well as protects absorbent materials (wood, gypsum)

against moisture. PRIMER STRONG WITH QUARTZ SAND is suitable for use on smooth and non-absorbent

surfaces such as old ceramic lining, terrazzo, smooth finished concrete, old firmly attached paint,

adhesives and PVC lining. It can also be used on wood-based surfaces (chipboard, OSB, boards),

gypsum surfaces (plasterboard, gypsum plaster, floor gypsum fibreboard) and anhydrite surfaces

(anhydrite screed). For indoor and outdoor use.

 

PROPERTIES:

PRIMER STRONG WITH QUARTZ SAND is a quick drying preparation made with the highest quality aqueous dispersion of acrylic resin and quartz powders. Aggregate content in the base layer enhances the

surface roughness, which facilitates the application of successive layers, and also increases the contact

area of adhesives to the surface. Furthermore, it balanced the absorption of the surface giving

the new layer the same binding conditions over the entire surface, regardless of the type of surface.

This allows the mortar (adhesive, plaster, putty, finishing coats) used to achieve the appropriate

strength parameters and thereby reduces the appearance of stains on the surface of the finishing

layer.

 

BASE PREPARATION:

The base must be _ rm, level, durable and stable. It must also be dry, clean, free of dust, grease and

other substances reducing adhesion. Remove old paint and material of poor adhesion.

 

COMPOUND PREPARATION:

PRIMER STRONG WITH QUARTZ SAND is sold in a form ready for use. Do not combine it with other materials,

dilute or thicken. Once opened, the contents of the bucket should be mixed until homogeneous.

HOW TO USE:

Spread the preparation uniformly over the entire surface with a roller or brush. Installation of cladding

or smoothing of the surface can be started once the compound dries completely, i.e. after

about 4 - 5 hours from the time of its application.

 

This information constitutes basic guidelines for the use of the product and does not

relieve users from responsibility for performing work in accordance with good building

practice and safety regulations.

 

CONSUMPTION:

Average of 0.3 kg/m²

PACKAGING:

3 kg plastic buckets

STORAGE AND TRANSPORT:

The product must be transported and stored in tightly sealed original containers, in dry conditions

at temperatures above zero Celsius. Protect from freezing and overheating. The shelf life is 12

months from the date on the package.

ATTENTION:

Protect eyes and skin. In direct contact with eyes, seek medical attention.

SPECIFICATIONS:

Adhesion to concrete: at least 1MPa

Working temperature (surface and ambient) from +5°C to +30°C