For occasional thorough cleaning or for regular cleaning of Porcelain
tiled floors subjected to heavy wear. Removes stubborn dirt, oil and grease.
Suitable for all ceramic and porcelain finishes. Concentrate, extra strong,
alkaline, solvent free.
A special product from the
LITHOFIN-Range for fully vitrified ceramic and porcelain tiles (KF). Lithofin
KF Intensive Cleaner is a strong alkaline product based on highly active and
biologically degradable components.
Technical Data:
Density: approx. 1,1 g/cm³
Appearance: liquid, yellowish
Odour: pleasant
pH-Value: >12
Flash Point: >65°C
Solubility in Water: --
Properties:
Lithofin KF Intensive Cleaner dissolves and removes stubborn
engrained dirt, oil and grease, rubber, care product residues, etc.
Field of Use:
For basic and thorough cleaning of surfaces where care with Lithofin KF
Conditioning Cleaner is not sufficient and for regular use on surfaces subject
to heavy wear and tear. Suitable for all polished and unglazed porcelain tiles.
Directions for Use:
Dilute Lithofin KF Intensive Cleaner up to 1:10 with cold or lukewarm water and
distribute evenly on the surface with a brush or scrubber. Allow the product to
work for 10 to 20 minutes, brushing occasionally and not allowing the product
to dry. Remove from the surface with a cloth or with a wet and dry vac and
rinse the surface with clear water.
Please Note:
Do not use on polished marble and other surfaces sensitive to alkali. Always
try the product in an inconspicuous area prior to use.
Coverage:
as supplied: approx. 10 to 15m² depending on dirt diluted: up to 200m²
Storage:
Keep closed, cool and dry. Shelf life of up to five years.
Environmental Protection:
Surfactants are biologically degradable in accordance with
EU-regulations.
Disposal:
Diluted product may be added to waste water. Containers are made of
environmentally friendly polyethylene (PE). Clean containers can be recycled
through collection systems.
Contents:
Non-ionic surfactants; sodium potassiumhydroxide; carbonates; auxiliary agents.
Risk and Safety Phrases:
Causes burns. Keep locked up and out of the reach of children. In case of
contact with eyes, rinse immediately with plenty of water and seek medical
advice. Wear suitable protective clothing, gloves and eye/face protection. In
case of accident or if you feel unwell, seek medical advice immediately (show
the label where possible).
First Aid Procedures:
In case of inhalation ensure fresh air. In case of contact with skin wash off
immediately with soap and water. In case of contact with eyes rinse thoroughly
with plenty of water and seek medical advice. Do not induce vomiting. If
swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures:
In case of spill or other release, take up with absorbent
material (e.g. sand, sawdust, general-purpose binder). Ensure adequate
ventilation. Product does not burn, fire-extinguishing activities according to
surrounding. Additional Information is listed on the Material Safety Data
Sheet. ADR2003: caustic alkali liquid, n.o.s. UN 1719, Class 8 Packaging Group
III
Packaging:
1-litre bottle with child-proof cap
Statements concerning environmental and safety issues refer to the product as
delivered (concentrated).
This
information should be considered to be informal and non-binding. The products
must be used according to local conditions and materials. Where no previous
experience is available, or in cases of doubt, test the product in an
inconspicuous area. (GB11.04gps/11.02)
